Mewant Installation Precautions

GREETINGS TO ALL THE MEWANT CUSTOMERS.

Mewant hand-stitched steering wheel cover is with high adaptability.

But it is a little difficult to install it.

During the installation process, many customers used the wrong method.

Next, I will show you some installation errors and correct installation solutions.

-------------------------------------------------------------------------------------------------------------

1 - Steering wheel factory leather is ripped

If the original factory leather was ripped badly,some customers simply remove it.

Please don't do that,or our steering wheel cover will not fit for your steering wheel.

Please use tape to repair the damaged parts.

-------------------------------------------------------------------------------------------------------------

2 -  Do I need removed the steering wheel if I want to install the cover?

A2 : You don't need remove steering wheel from your car when install the cover,

we removed it just for a better display effect.

-------------------------------------------------------------------------------------------------------------

3 - Please carefully identify the front side and back side of the cover.

4 - How to tuck the material into spokes position?

5 - Please do not to sew the steering wheel cover with dual threads,or the thread on the cover will be ripped.

6 - Please do not sew the steering wheel cover by skipping stitches,otherwise there will be small gaps.

If you sew the cover stitch by stitch, the final installation effect is as shown below.

If you encounter any problems during the installation , please contact Mewant in time.

More installation tips : https://youtu.be/jDdY8xGLJr0